Smart Bike Tail Lights Wireless Anti-Theft Alarm Bicycle Horn USB Rechargeable
ULTRA-BRIGHT LED BIKE TAIL LIGHT:Bike tail light and brake light with 31 high-end LED lights and the brightness up to 160 LM. 5 in 1 function, with Warning Light / Brake Light / Turn Signal / Electric Bell / Anti-theft Alarm function REMOTE CONTROL:Strong wireless range about 98ft-196ft, made you easy to switch the lighting modes of the bike rear light 6 Modes:Slow Flashing / Breathing / Fast Blinking/ Steady Light / Emergency Light / OFF ANTI-THEFT BIKE ALARM:make a loud sound and vibrations, 110DB Loud can effectively scare thieves away USB RECHARGEABLE:2000mAh rechargeable battery, keep running for working up to 70 hours after 7h full charge. The remote controller equipped with a CR2032 replaceable coin cell battery and it can keep working for 3 years.
4.2A High Speed Smart Dual USB Ports Wall Charger Outlet. Taillight Battery: 3.7V 2000mAh lithium battery (included). Bike Alarm Taillight Charging Port:Standard USB-C 5V.
Remote Control Battery:CR2032 button. Standby time:35 years (30 times per day).Rechargeability: Taillight battery only (USB Type-C rechargeable). Tail Light Battery Life: Up to 70 hours (on fast flash mode). Tail Light Battery Life: Up to 30 hours (on steady mode). Working Environment Temperature:-40 +60?
Please full in charging before the first usage, otherwise the remote will not work well!! Once you brake the tail light will auto highlight for 2s to alert other drivers behind you. Control left turn via wireless remote control Turn lights that flow like a car and emit "IDIDA" sound Press the button again to close. Control right turn by wireless remote control Turn lights that flow like a car and emit "IDIDA" sound Press the button again to close. In emergency light mode, the light flashes quickly to remind vehicles behind Important safety reminder for temporary parking.
Tail light can be used as a bike alarm. 7 level adjustable sensitivity from gently touch to push or beatif the alarm taillight detected vibration, it will sound a warning for 2 seconds; if it detected vibration again within 2-12 seconds, the alarm taillight will sound for 30 seconds to. Scare off the thief (multiple sounds loop). The Remote control also can be used as a bike electric horn. With electric bike horn function, makes 110 decibel loud horn sound when press remote to let cars/.Pedestrians/drivers know you're coming. 3 horn sounds for your choice. Remote control the bike tail light to send signals in different modes by the 5 easy to use buttons on the wireless controller. Remote control on handlebar, easy for cyclist to control during riding. Suitable for Mountain, MTB and Road Bicycles.
On Slow Flashing & Breathing modes, tail light automatically turns off after 30 seconds of inactivity in dark environments. And turns on when motion is detected. In bright environments it automatically turns off to save power. If you need the tail. Light in day time, you can select Fast Blinking\Steady Light.
Yellow Flowing Light: Turn Signal Light. Yellow Flashing Light: Emergency Light. Red Light: Slow Flashing / Breathing / Blinking / Steady Light.31 high-end LED lights, up to 160 lumens of powerful flashes alert motorists at night and during the day, that enhance your visibility and safety. Built-in a 2000mAh rechargeable battery, at 7h full charge the taillight alarm can work up to 70 hours. The remote controller clamps easily to a 0.78-0.94 inch handlebar and is equipped with a CR2032 replaceable coin cell battery. IP54 Waterproof level make this bike turning light can be used in small to moderate rain in the temperature of in -4-140°F --The production adopts high-quality PC + anti-UV material, waterproof and dust-proof, high/low temperature resistance, not afraid of wind and rain/severe cold/ scorching heat.
Installation of the bike alarm taillight. Place the silicone ring on the suitable location of seat post.
Put the taillight bracket into the silicone ring, align the contours on the silicone ring, then fix it with screw. Insert the bike alarm taillight into the taillight bracket. Installation of the remote control.
Place the silicone ring on the suitable location of handle bar. Put the remote bracket around the silicone ring, align the contours on the silicone ring, then fix it with screw. Press down and turn the remote counter-clockwise until it locks into place.Mountain bike / Child bicycle /Road bike / Bicycle commuting / Ladies bike / Ordinary bicycle / Electric bike.